close x

Category Archives: Case studies

Robotic Packaging System Packs Filler Caps

Robotic Packaging System Packs Filler Caps

Written by:

RNA developed an automated robotic packaging system for packaging 2 different types of filler caps. The system utilises a machine mounted Nachi MZ07L robot with a bespoke gripper system to suit the filler cap and the corrugated interleafs. Continue Reading

Case studies Recent news0 comments

Robotic Parts Feeding System Handles Swiss Watches’ Most Delicate Parts

Robotic Parts Feeding System Handles Swiss Watches’ Most Delicate Parts

Written by:

Contributed by | Asyril

Asyril’s 3-axis vibration feeder can handle parts smaller than 0.1 mm and up to 10 mm in size.

For years, specially trained employees at Swiss watch part supplier Affolter SA underwent the tedious task of manually handling a large variety of highly precise parts designed to operate some of the world’s best watches. The work was monotonous but necessary. Continue Reading

Case studies Featured products0 comments

Centrifugal Feeding System with Vision Inspection

Centrifugal Feeding System with Vision Inspection

Written by:

RNA designed and built a centrifugal feeding systems to feed and orientate filled capsules. The task required capsules to be orientated with major diameter leading and discharged end to end all one way at a speed of 300 parts per minute. Due to the nature of the products, it was impossible to mechanically checked the orientation of the capsules. Therefore, a vision system was applied to meet the requirements of this application perfectly. Continue Reading

Case studies Featured products0 comments

Robot System for Automatic Screw Shear & Bung Assembly

Robot System for Automatic Screw Shear & Bung Assembly

Written by:

The world’s leading manufacturer of electricity meters approached RNA to design and developed a robot system for automatic screw shear and bung assembly. Working alongside our customer, RNA have developed an automatic robot system to shear and dispose of the screw heads for both an existing smart meter housing and a new type smart meter housing and additionally assemble the square and round bungs to the new type meter on a test and print system. Continue Reading

Case studies Featured products0 comments

Cobots speed up assemblies

Cobots speed up assemblies

Written by:

A mobile cobot supplied by RNA Automation has helped to meet car seat assembly requirements.

RNA Automation has been responsible for introducing lightweight collaborative robots (cobots) from Universal Robots on a car seats production line which has been achieved in the same working space as before.

Continue Reading

Case studies0 comments

Automated Cap Assembly and Indexing System

Automated Cap Assembly and Indexing System

Written by:

RNA were contracted to design and develop a cap lid and body assembly machine at a speed of 2400 assembled caps per hour. The system was manufactured in a compact design, equipped with body and lid feeding systems, a 4 stations rotary indexing table, main controller, operating panel and safety devices.

Continue Reading

Case studies Featured products0 comments

Six Axis Robot Clipping & Welding System

Six Axis Robot Clipping & Welding System

Written by:

A leading global supplier of automotive components approached RNA to design and develop an automatic system for the assembly and Poka-Yoke of console side panels (left hand & right hand). Continue Reading

Case studies Recent news0 comments

Robot De-Moulding & Assembly Cell

Robot De-Moulding & Assembly Cell

Written by:

The world’s leading intelligent lock manufacturer approached RNA to design and develop a robot de-moulding & assembly cell system to handle and assemble plastic moulded letter box facia plates. There are nine variants in terms of moulding shape and size and all variants are produced on the same moulding machine with a moulding cycle time of between 35 to 45 seconds. Continue Reading

Case studies Featured products0 comments

Pick to Pack Automated System

Pick to Pack Automated System

Written by:

A world’s leading safety barrier manufacturer approached RNA to help them with automating the picking process of their accessory packs. RNA designed and developed a feeding and packaging system that could automatically count and pack various plastic products, stepping up from manual packing to meet the rapidly rising market demand. Continue Reading

Case studies Featured products0 comments

Improve Productivity with Poka Yoke

Improve Productivity with Poka Yoke

Written by:

RNA Carpet Gap Hider Poka Yoke Station – RNA designed and built a bespoke workstation, applying Poka-Yoke (also called mistake proofing) requirements to prevent the human errors that result in product defects.

The workstation was dedicated to apply the correct label to correct product (two types). The task required a high concentration from the worker, and was the cause of many errors, since two types of products are too similar to each other, both in size and in colour. Continue Reading

Case studies Featured products0 comments

  • Contact Details

    RNA Automation Ltd

    Hayward Industrial Park, Tameside Drive Castle Bromwich Birmingham, UK, B35 7BT

    T:  +44 (0)121 749 2566

    E:  sales@rna-uk.com

    Fax:  +44 (0)121 749 6217

Free Consultation

Contact us today for a free consultation, process review or quote

Your Name (required)

Your Email (required)

Telephone number (required)

Country (required)

Company(required)

Type of Business

Industry Sector

Key Objectives

Message